Performance tune for BMW E46 - 3 Series - (1999-2006)
E46 3 Series (Non M3) TUNE
This is our tried and tested tune for all E46 3 Series (323, 325, 328, 330). These tunes were designed on a Dynojet dyno and tested in the real world! All tune packages come with an OBD to USB cable and software to read and write your DME/ECU. A Windows computer is required to utilize the RK-Tunes flash software. Check FAQ section for windows device recommendations.
⦁ Top speed governor removed
⦁ Increased RPM rev limit
⦁ VANOS cam timing adjustment
⦁ Improved throttle response
⦁ Ignition timing enhancements
⦁ Air/Fuel Ratio enhancements
⦁ Fuel - Selectable fuel octane rating (91, 93)
⦁ Rear O2 Sensor Delete - If you are running aftermarket headers please select O2 Sensor delete. We will remove all coding associated with rear O2 sensors
⦁ SAP (Secondary Air Pump) Delete - If you have deleted your Secondary Air Pump, please select this option and we will remove the coding from the DME/ECU to avoid a CEL.
⦁ **Burble only for certain ECU Types and must be Catless** MS42 and MS43 ECU
PERFORMANCE SPECS BASED ON MODIFICATIONS: 10-15+ WHP 8-14+ FT/LBS TQ
In the modification box, please specify all current vehicle modifications and desired options.
Performance tune for E46 M3
This is our tried and tested tune for an E46 M3. These tunes were designed on a Dynojet dyno and tested in the real world! We offer both MAF...
S52 Swap Tune (E36 M3 motor in a diffrent chassis)
S52 SWAP TUNE This is our tried and tested tune for all swapped S52 engines. These tunes were designed on a Dynojet dyno and tested in the real world! All tune packages...
S54 Swap tune (E46 M3 motor in a different chassis)
S54 Swap tune for an E46 M3 motor with a factory Mss54 / mss54HP dme. This turns the factory E46 M3 Engine DME into a "Stand alone" DME. It will...